Industrial automatic cloth slicer wholesale production line
After the laminating fabric of the laminating machine comes out, the position of the limit switch can be adjusted according to the length of the storage through the floating roller storage mechanism of the machine. When the storage floating roller contacts the lower limit switch, the pneumatic finger immediately starts to pull the material, which can ensure enough length. It extends along the guide roller into the notch of the compression cylinder, presses the cylinder down, and enters the action procedure.

share it:
product information
After the laminating fabric of the laminating machine comes out, the position of the limit switch can be adjusted according to the length of the storage through the floating roller storage mechanism of the machine. When the storage floating roller contacts the lower limit switch, the pneumatic finger immediately starts to pull the material, which can ensure enough length. It extends along the guide roller into the notch of the compression cylinder, presses the cylinder down, and enters the action procedure.

Machine size
3100 (long) x 700 (wide) x 2050 (high) mm
Driving mode
Servomotor
Electronic control mode
   PLC
Control panel
Touch screen
Voltage
   220V, 50/60HZ,1P
Power consumption
   0.75~2.5KW
Applicable materials
PP spunbonded fabrics, melt-blown fabrics, electrostatic cotton
Product specification
Design according to customer's requirement
capacity
40-120 tablets per minute

Product features:


1. The user-friendly straight row structure minimizes the impact of heat on the operator during the cutting process.


2. Adopt electronic constant temperature control system to control cutter heating, so as to improve energy saving effect.


3. The independent infrared automatic edge alignment (deviation correction) system is adopted for the hot cutting machine, which makes the cutting process smooth, the cloth more orderly, and greatly reduces the loss of the edge material.


4. The newly designed cloth basket with transition device is also convenient for slitting whether it is a roll cloth or a match cloth. Compact mechanical design greatly reduces the floor area of the machine, thus saving space.


5. The cutter used in the hot cutting machine is made of tungsten steel alloy by special process, and its service life is greatly improved. At the same time of cutting, the temperature is used to seal the burr of the cloth, so that the cloth has no burr and does not leave cloth scorch. The hot slitting machine is suitable for chemical fiber cloth, such as nylon, tent cloth, umbrella cloth, chiffon, colored Ding cloth, 45 degree twill cloth, geotextile, non-woven cloth, chiffon, etc.; the hot slitting machine is suitable for cutting materials in lace production, clothing processing, computer embroidery, packaging, color flag production, gift jewelry, shoes processing, decoration accessories and other industries.