Bf-23SAU Cup mask manufacturing machine
The main part of the mask can use 6-10 layers of PP non-woven fabric and filter material. From the cup mask body feeding to the nose line bonding, ear band welding or binding are a line of automatic operation. At the same time, it is optional to add breathing valve perforation or printing, and the filtering effect can reach N95 standard. In order to meet the production needs of different cup masks, there are different models available.

share it:
product information
The main part of the mask can use 6-10 layers of PP non-woven fabric and filter material. From the cup mask body feeding to the nose line bonding, ear band welding or binding are a line of automatic operation. At the same time, it is optional to add breathing valve perforation or printing, and the filtering effect can reach N95 standard. In order to meet the production needs of different cup masks, there are different models available.
Machine size
3,500 mm (long) x 1,500 mm (wide) x 1,670 mm (high)
Driving mode
Servomotor
Electronic control mode
MITSUBISHI Japan
Control panel
Man-machine interface (touch screen) and buttons
Voltage
220V, 50/60HZ,1P
Applicable materials
Needle-punched cotton, hot-rolled cotton, melt-blown filter cotton.
Product specification
The length of nose thread and ear strap can be set as required.
Productivity
More than 20 per minute
Remarks
 
Optionally add breathing valve punching or printing. The following models are available:

1. AU - Aluminum nose line and ultrasonic ear band welding mode are selected.

2. AS - Aluminum nose thread and ear strap are used for stapler binding.

3. PU - Plastic nose thread and ultrasonic ear band are selected for welding.

4. PS - Plastic nose thread and ear strap are used for staple needle binding.

5. AUA - Aluminum nose line and earband are welded by ultrasonic oblique welding.

6. ASA - Aluminum nasal thread and ear strap are used as staples and oblique nails.