What is the principle of the mask printer

发布日期:2020-01-06 15:20
share it:
Folding mask machine manufacturer's mask laminating machine mainly uses the principle of ultrasonic welding and active edge sealing to complete the welding and punching process of cup-shaped mask edge. Let's give you a brief introduction!


What is the discharge system of the
mask printer? Namely:


1. One time forming two pieces of products to improve production speed.


2. Product discharging position, active stacking, convenient for packing and stacking of products, saving time and labor for the next process ear belt welding.


3. The whole machine has stable functions, continuously adjustable production speed, high production efficiency, up to 160 pieces per minute, convenient and accurate counting, high utilization rate of materials, simple and quick operation and conditioning, high degree of initiative, and effective reduction of labor costs.




It's said that the mask body products produced by the mask printer are not final consumer products, but only semi-finished products, which need further processing to meet our daily needs. Therefore, the mask body machine is only the beginning of the mask production process; it is mainly used for the production of inner ear mask, outer ear mask and bandage mask, for example The production of bandage mask is to place the body products of the mask on the conveying equipment of the machine, wrap them by pulling the cylinder, press and weld them with ultrasonic flower wheel, cut off the bandage, and then output the products. Only one person needs to place the body of the mask on the conveying belt of the machine, and the rest of the follow-up work is completed actively.


The mask wood chipper can cut logs, small-diameter logs and branches with a diameter of less than 200 mm, and can process, pine, miscellaneous wood, lifting wood, fir and original bamboo;


Folding respirator manufacturer's wood chipper has compact structure, small floor area, good wood slice quality, low power consumption, and is suitable for mobile work;


The wood chipper is widely used in the material preparation section of small and medium-sized particleboard and fiberboard production companies, and also in the production of wood chips for individual businesses.


The structure of the wood chipper is composed of the main machine, coupling, underframe, motor, base, cutter head, feeding port, cover, electric control system, etc., and the main machine of the chipper is composed of the cutter head, upper and lower cover, feeding port, discharging port, etc.


Characteristics of
wood chipper

1. The wood chipper adopts low-voltage or high-voltage motor. The large-scale disc type wood chipper has two kinds of driving, namely belt pulley driving and direct coupling driving. The feeding can be divided into two kinds of methods: horizontal slow skew, and the discharging can also be divided into two ways: feeding and discharging.

2. The wood chipper has compact structure, reasonable planning, simple device, convenient operation and maintenance, high production capacity of folding mask machine manufacturer; when cutting logs, the quality of wood chips is high, and the length of wood chips can be adjusted within the regular range, which is the leading disc wood chipper in China.
Read more articles