Maintenance details of the folding mask machine

发布日期:2019-11-18 18:24
share it:
It is very important to buy and return the mask equipment. The main maintenance is done, the equipment is also running smoothly, and the masks produced meet the standards. The area affected by this detail is very large. Let's check the common problems and treatments below: 

First, the appearance:

Masks are used for wearing on the face, and some even have to be used in the operating room, so the production of masks requires the mask machine to be cleaned every day. You can arrange for the staff to clean the countertops of the equipment and the masks for the masks after the power is turned off every day. Be careful not to use water, use oil, and use other non-toxic and volatile cleaning liquid such as alcohol. 

Second, the ultrasound system:

Check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer, and welding head. It is necessary to monotonically clean without water, and the connection line is not strong. The degree of wear of the ultrasonic horn (mold) is often checked. Be careful to check if the voltmeter and ammeter pointer on the ultrasonic box are normal. 

Third, the transmission system:

The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. The protection of the mask machine needs to check whether the surface of the motor has dust or other things that affect heat dissipation. Whether the gears and sprockets are oiled or not. Whether the chain tightness is suitable or not, whether the coupling screw of each transmission member is loose or not. Is the lubricating oil of the reducer enough? It is usually necessary to replace the lubricating oil once in 1000 hours - 1500 hours. 

Fourth, the electrical system:

Check whether the circuit connector of the mask machine is loose, whether the main power line, branch signal line, etc. are worn out? Aging? Loose? The inside of the box is clean and monotonous, and the exhaust fan is not working properly. 

Five: Pneumatic system:

Is there any water in the air filter check? Check the air pipe for leaks? Is there any air leakage in the cylinder? The cylinder magnetic anti-sensor orientation and work are normal. 

In addition: the device can not touch corrosive liquids and objects, for example: sweat is very simple and causes the parts of the device to rust. If the equipment is not used for a long time, it is necessary to wipe the transmission system and the rust-proof parts of the mask machine with anti-rust oil.

The mask manufacturer protects the mask production equipment according to the demand, not only can reduce the number of repairs of the mask machine, but also the working life of the front import
mask machine, and then supply the company's production power.
Read more articles