1.non-woven mask machine uses ultrasonic welding, needle and thread needn't be needed, needle and thread change time and again is omitted, there is no break joint condition of traditional thread suture, and some neat shearing and sealing of textiles can also be carried out. Stitching together also plays a decorative effect, strong adhesion, can achieve waterproof effect, clear embossing, surface more with three-dimensional relief effect, fast operation, product effect is better and more beautiful; quality is guaranteed.
2. Non-woven facemask machine uses ultrasound to process special steel wheels. The sealing edge does not crack, does not damage the fabric edge, and does not have the appearance of wool edge and curling edge.
3. It does not need preheating in manufacturing and can be operated continuously.
Fourth, folding mask machine operation is concise, and traditional sewing machine operation method is not much different, usually sewing can be operated.
5. Low cost, 5 to 6 times faster than traditional machines, high efficiency.
Maintenance and protection of non-woven mask machine is mainly appropriate. It can not only delay the speed of precision decline of non-woven mask machine, but also reduce the probability of equipment repair. Usually we divide the protection of non-woven mask machine and folding mask machine into several aspects: appearance, transmission system, electrical system, ultrasonic system and pneumatic system. (Protection and maintenance of equipment is necessary after shutdown and power failure)
Appearance: Masks are used to wear on our faces, and some of them even need to be used in the operating room. Therefore, it is necessary for the production of masks to request that the non-woven masks machine be cleaned neatly. Every day at work, people need to be arranged to clean the working table of the equipment and the dishes with masks after power off. Watch out that no water or oil can be used. Alcohol and other non-toxic and volatile cleaning liquids can be used.
Transmission system: The transmission system includes motor, gear, reducer, sprocket, chain, conveyor belt and other components. Let's check whether there is dust on the outer surface of the motor, which affects heat dissipation, whether the gear and sprocket are oiled or not, and whether there are attachments. Whether the chain tightness is suitable or not, and whether the connecting screw between the transmission parts is loose, etc. Is the lubricating oil enough for the reducer? It is usually necessary to replace the lubricating oil once in 1000-1500 hours.
Electrical system: check whether the equipment circuit connector is loose, whether the main power supply line, branch signal line, etc. are worn out? Ageing? Electrical material loose? Whether the inside of the electric box is clean and dry, whether the exhaust fan is working properly, etc.
Ultrasound system: (composed of ultrasonic box, sensation, welding head and connecting wire) check whether the ultrasonic system is clean, especially the ultrasonic box, sensation (transducer), welding head (expansion ratio) need to be dry cleaning can not have water, the connecting line needs to be firm. Often check the wear degree of the ultrasonic welded joint. Pay attention to investigating the change scale of voltmeter and ammeter pointer on folding mask machine.