Solution / The Manufacturer of Folding Mask Machine Says the Wear Scene of Machinery and Equipment
The Manufacturer of Folding Mask Machine Says the Wear Scene of Machinery and Equipment
The most prominent feature of the faults in the machinery and equipment of folding mask manufacturers is the damage of the cooperation among the parts of the machine. The main reason for the damage of the cooperation is the premature wear and tear caused by the continuous wear, impact, high temperature corrosive substances on the surface of the cooperation. In this way, the shape, size, metal surface (chemical composition, mechanical properties, metallographic structure) of the parts are changed, and then the accuracy and proper function are reduced.
One of the most important scenarios associated with the onset of conflict is wear and tear. Usually, the wear and tear phenomenon is as follows: because of the mechanical effect of the conflict, the appearance is damaged, and the temperature of the conflict surface rises because of the heat of the conflict, because the heat effect will show small cracks, sometimes part of the appearance will fall off under the influence of this factor, if the temperature is too high, it will melt away; in corrosive environment. In the case of corrosion, loss and so on.
Natural wear is the result of the conflict force of the parts of folding mask manufacturer under normal working conditions because of the contact appearance. Sometimes due to the effect of ambient temperature or corrosive substances, wear and tear gradually increase. This wear and tear is normal and inevitable. End-to-end wear and tear is caused by the untimely maintenance of the machine, or the poor quality of the maintenance, or by the defect of the machine parts and the low quality of the information, as well as by the severe abrasion which violates the operating rules and constitutes the scene of end-to-end wear and tear.
In conclusion, natural wear is inevitable. Therefore, the mission of manufacturers of folding masks is to adopt methods to improve the strength and wear resistance of machine parts, improve working conditions, especially in the use of mechanical equipment, to smooth and protect the machine parts, and then reduce the wear strength, so as to extend the service life of the machine.