Solution / Inspection of Outside Point Machine Equipment of Folding Mask Machine
Inspection of Outside Point Machine Equipment of Folding Mask Machine
The transmission system of the exterior point machine of folding mask machine includes motor, gear, reducer, sprocket, chain, conveyor belt and so on. We need to check whether there is dust attached to the exterior of folding mask machine, and whether the gear and sprocket are oiled or not. Whether the chain tightness is suitable for foreign bodies or not, and whether the connecting screw between the transmission parts is loose, etc. Is the lubricating oil enough for the reducer?
1. Ultrasound system: (consisting of an Ultrasound box, a trembler, a welding head and a connecting wire).
To check whether the ultrasonic system is clean, it is necessary to monotonously clean the ultrasonic box, trembler (transducer), welding head (expansion ratio) without water, and the connection must be firm. Ultrasound weld wear is often checked. Look carefully for the change plan of the voltmeter and ammeter pointer on the ultrasonic box.
2. Gas supply system of folding mask machine: (composed of air source filtration system, air pipe and cylinder).
See if there is water in the air filter cup? Drain water, by the way to the air compressor water (air compressor water: humidity area to the air compressor water every day). Check if there is a leak in the trachea? Is there air leakage in the cylinder? Cylinder magnetic induction preventer position and operation is normal.
3. Electrical system:
Check whether the device circuit connector is loose, the main power supply line, branch signal line, etc. are there wear and tear? Ageing? Electrical material loose? Whether the inside of the electric box is clean and monotonous, whether the exhaust fan is working normally, etc.