How to Maintain Mask Equipment

发布日期:2019-09-16 10:30
share it:
It is very important to purchase and maintain the mask equipment. The main maintenance is in place, and the equipment is running smoothly. The mask produced meets the standard. Doing well this detail has a great influence on the area. How can we check the common problems and solutions?

1. Appearance:

Masks are what we wear on our faces, and some even need to go into the operating room, so the production of masks needs to be cleaned every day. Every day after work, people can be arranged to clean the working table of the equipment and the dishes with masks after power off. Be careful not to use water, oil, alcohol and other non-toxic and volatile cleaning liquids.

2. Ultrasound system:

Check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer, welding joint need monotonous cleaning can not have water, the connection is robust. Usually check the wear degree of the ultrasonic welding head (die). Be careful to check whether the voltmeter and ammeter pointers on the ultrasonic box are normal.

3. Transmission system:

Driving system includes motor, gear, reducer, sprocket, chain, conveyor belt and other components. Mask machine protection needs to check whether there is dust on the surface of the motor and other things affecting heat dissipation. Whether gear and sprocket are oiled or not, whether there are attachments. Whether the chain tightness is suitable or not, and whether the connecting screw of each transmission is loose, etc. Is the lubricating oil enough for the reducer? Usually it needs to be replaced once in 1000 - 1500 hours.

4. Electrical systems:

Check whether the circuit connector of the mask machine is loose, whether the main power supply and branch signal lines are worn out, aging, loosening, whether the electric box is clean and monotonous, whether the exhaust fan is working properly, and so on.

5: Pneumatic system:

Is there water in the air filtration inspection? Is there air leakage in the air duct? Is there air leakage in the cylinder? Is the orientation of the magnetic inductor in the cylinder and the work normal?

In addition: equipment can not touch easily corrosive liquids and objects, such as: sweat is very simple to rust equipment parts. If the equipment is not used for a long time, the transmission system and rusty parts of the
mask machine should be coated with anti-rust oil.
Read more articles